Attract-Mode Support Forum
Attract-Mode Support => General => Topic started by: abls1 on June 05, 2015, 05:13:20 AM
-
How do I run mugen on AM?
Thanks
-
use emulator windows_games with windows-shortcuts
1) create a link-file of mugen.exe
2) create a folder links (or something else)
3) start AM and configure the emulator windows_games
4) add your links folder as rom-path
5) check .lnk is set as a rom-extension (lnk means link). if not, add it.
6) generate rom list
btw:
mugen is included in paintown (http://paintown.sourceforge.net/#) too
-
Not sure of the config
here is mine:
executable D:\attracmoded151\windows-games\promelium.exe (this is a shortcut)
args /c "[romfilename]"
rompath D:\attracmoded151\windows-games (folder pointing to shortcut)
romext .lnk;.bat
system PC
info_source thegamesdb.net
Not sure what to do with args so I left it unchanged
Thanks
-
This is very frustrating.. why do I really need to do a bunch of configurations just to run a .exe file that do not use roms. I use Steam to run non Steam games and all it ask me is to point to the .exe file.
-
please do what members you tell. creating link-files/shortcuts of your .exe and use the windows-games emulator is the trick and an easy solution. so you do not have to setting up a 'bunch of configurations'.
-
I did as i was told and i have a mugen error
executable F:\mugen screen packs\PROELIUM\mugen-1.1b1\promelium.exe
args F:\mugen screen packs\PROELIUM\PROELIUM\data\mugen.cfg
rompath D:\attracmoded151\windows-games
romext .lnk;.bat;.exe
system PC
info_source thegamesdb.net
created the shortcut and when launched i got a mugen error so i changed rom path an nothing
-
i see. what you use is not mugen directly. this is m.u.g.e.n (http://www.elecbyte.com/mugen)
promelium is a motifs/modification/skin-map-pack for mugen. and that's a little bit tricky to use, because it's not possible to start mugen the common way like another execution-files.
usually it's possible to start an .exe this way (but this doesn't work in this case with mugen.exe) : path_to_exe\file.exe -parameters
you have to use this syntax : cd path_to_exe & file.exe -parameters
this is my config for mugen & it works:
# Generated by Attract-Mode 1.5.3
#
executable cmd
args /c cd C:\attract\EMU\mugen & mugen.exe -r [name]
rompath C:\attract\EMU\mugen\data
romext <DIR>
system PC
1) create a folder (in your case promelium)
2) unzip all files from promelium-zip-file; copy all these files in the root of this folder (see screenshot enclosed)
3) move the folder to C:\attract\EMU\mugen\data
4) configure AM