My PC inside my arcade machine is not working. Perhaps some one can confirm or help diagnose? It’s only 3 years old with minimal run time as I spend more time coding on my iMac than playing games.
PC was working with windows 10, crt emudriver, hd5450 OEM bios, jpac.
Video sometimes flickered when I touched pc/cable/jpac. I never really narrowed it down.
Removed PC to install new hard drive to setup for my friend. Connected vga on hd5450 to lcd. No video. Tried vga on mb as well. Also hdmi. No video. Reconnected old hard drive that was working in my arcade machine. Figured I would at least get bios. Nothing. Reconnected it to jpac and arcade machine. Nothing.
Connected new hard drive and lcd again. Removed power, battery, and moved jumper to clear bios. Perhaps my fast start setting was messing things up. Held power button for half minute while off. Turned on. Held power again. Removed power, put jumper back, reinstalled battery, powered up again. No video any ports (except dvi, didn’t try no cable). Removed video card. Tried again. No video.
Does this sound like a symptom of a bad motherboard? Perhaps physically moving it out the arcade machine and it not working was a coincidence?
Asus p8h61-1 r2.0