Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Manual do Fliperama

Pages: [1]
1
Text in English
Greetings everyone. I've been looking for this solution for a long time but without success, so I decided to ask in the forum. I would like to know how to make Attract Mode access subfolders, as I intend to use it as a Karaoke system, so that within each main theme I have separate folders from A to Z, having an extra folder with the characters 0 a 9. Today, I have been using Batocera, because the Emulationstation frontend works that way, but my desire is to have the immense ease of creating layouts for Attract Mode, of which I am an administrator of a group on Facebook (https://www.facebook.com/groups/334886130197658/) where we share our knowledge about this wonderful frontend. I don't know if it's some configuration when compiling (Yes, compiling, because I really like to use it on Linux) or some configuration in the arguments of the systems and being used. If anyone can give some guidance, I already leave here my thanks. Here's a video of the system I built with Batocera: https://youtu.be/Tf9vnQgjwkM

Texto em Português
Saudações a todos. A muito tempo venho procurando essa solução mas sem sucesso, e por isso, decidi perguntar no fórum. Eu gostaria de saber como fazer o Attract Mode acessar subpastas, pois pretendo usá-lo como um sistema de Karaokê, de forma que dentro de cada tema principal eu tenha as pastas separadas de A a Z, tendo uma pasta extra com os caracteres de 0 a 9. Hoje, tenho usado o Batocera, pois o frontend Emulationstation trabalha dessa forma, mas meu desejo é ter a imensa facilidade de criar layouts para o Attract Mode, do qual sou administrador de um grupo no Facebook (https://www.facebook.com/groups/334886130197658/) onde compartilhamos nossos conhecimentos sobre este maravilhoso frontend. Não sei se é alguma configuração na hora de compilar (Sim, compilar, pois eu gosto muito de usar em Linux) ou alguma configuração nos argumentos dos sistemas e serem utilizados. Se alguém puder dar alguma orientação, já deixo aqui o meu muito obrigado. Segue um vídeo do sistema que montei com o Batocera: https://youtu.be/Tf9vnQgjwkM

Texto em Español
Saludos a todos. Llevo mucho tiempo buscando esta solución pero sin éxito, así que decidí preguntar en el foro. Quisiera saber como hacer para que Attract Mode acceda a las subcarpetas, ya que pretendo usarlo como un sistema de Karaoke, de manera que dentro de cada tema principal tenga carpetas separadas de la A a la Z, teniendo una carpeta extra con los caracteres 0 a 9. Hoy he estado usando Batocera, porque el frontend de Emulationstation funciona de esa manera, pero mi deseo es tener la inmensa facilidad de crear diseños para Attract Mode, del cual soy administrador de un grupo en Facebook (https://www.facebook.com/groups/334886130197658/) donde compartimos nuestro conocimiento sobre esta maravillosa interfaz. No sé si es alguna configuración a la hora de compilar (Sí, compilar, porque me gusta mucho usarlo en Linux) o alguna configuración en los argumentos de los sistemas y en uso. Si alguien puede dar alguna orientación, ya dejo por aquí mi agradecimiento. Aquí hay un video del sistema que construí con Batocera: https://youtu.be/Tf9vnQgjwkM

2
Scripting / Rotate the text
« on: February 13, 2021, 01:33:12 PM »
I need to rotate a text for my Pinball theme, but I'm not getting it. Can someone help me?

Eu preciso rotacionar um texto para meu tema de Pinball, mas não estou conseguindo. Alguém pode me ajudar?


3
Themes / SImple Pinball theme
« on: February 12, 2021, 08:24:55 AM »
I created a theme for my mini Pinball. Soon, I will share with the community. I am perfecting some things. I'm using the Multimon plugin with the images of each table on a second monitor. I accept suggestions.

Criei um tema para meu mini Pinball. Em breve, vou compartilhar com a comunidade. Estou aperfeiçando algumas coisas. Estou usando o plugin Multimon com as imagens de cada mesa num segundo monitor. Aceito sugestões.

https://www.youtube.com/watch?v=xN93y7deNRQ

4
is it possible to make AM read the roms inside a folder?
é possivel fazer o AM ler as roms dentro de uma pasta?

5
I would like to browse within folders on a given screen in AM. But I don't know which configuration is correct in the emulator configuration to be used.
Eu gostaria de navegar dentro de pastas numa determinada tela no AM. Mas não sei qual a configuração correta na configuração do emulador a ser utilizada.

Instead of the list with all the roms, I want to have the list of folders because the roms are separated by themes or alphabetical order.
Ao invés da lista com todas as roms, eu quero ter a lista de pastas pois as roms estão separadas por temas ou ordem alfabética.

Does anyone know how to do this configuration?
Alguém sabe como fazer essa configuração?

Should this configuration be made in the emulator's .conf file, or should I use a special script in a theme dedicated to this use?
Essa configuração deve ser feita no arquivo .conf do emulador ou devo usar algum script em especial em um tema dedicado a essa utilização?

Thank you very much in advance.
Desde já, muito obrigado a todos.

http://prntscr.com/uf2ber

6
Themes / Simple Retro Layout
« on: November 04, 2019, 11:41:15 AM »
Tema simples baseado no frontend PAULA.

Simple theme based on PAULA frontend.








7
General / Attract Mode "Jukebox"
« on: May 18, 2017, 12:38:46 PM »
I'm trying to turn the Attract Mode (AM) into a Jukebox. I have already been able to play mp3 files separately, but this implies having a configuration for each CD, which would be bad for inserting new CDs. With the settings below, I can add the folders, but I do not know how to navigate those folders and run each mp3 file, instead of adding all the music in the list:

# Generated by Attract-Mode v2.2.1
#
executable           C:\Program Files (x86)\K-Lite Codec Pack\Media Player Classic\mpc-hc.exe
args                 "[romfilename]"
rompath              d:\music
romext               <DIR>
exit_hotkey          Escape
artwork    flyer           
artwork    marquee         
artwork    snap            D:\Jukebox\capas
artwork    wheel     

Does anyone have any solutions to this question?
----------------------------------------------------------------------

Estou tentando transformar o Attract Mode (AM) em uma Jukebox. Já consegui reproduzir arquivos mp3 separadamente, mas isso implica em ter uma configuração para cada CD, o que seria ruim para a inserção de novos cds. Com as configurações abaixo, eu consigo adicionar as pastas, mas não sei como fazer para navegar nessas pastas e executar cada arquivo mp3, ao invés de adicionar todas as música na lista:

# Generated by Attract-Mode v2.2.1
#
executable           C:\Program Files (x86)\K-Lite Codec Pack\Media Player Classic\mpc-hc.exe
args                 "[romfilename]"
rompath              d:\music
romext               <DIR>
exit_hotkey          Escape
artwork    flyer           
artwork    marquee         
artwork    snap            D:\Jukebox\capas
artwork    wheel 

Alguém tem alguma solução para esta questão?

8
Emulators / Problems with Retroarch + Attract Mode + Lubuntu 16.04
« on: September 25, 2016, 09:23:13 PM »
I am moving all my arcades for Linux. Using the MAME emulator, the NeoGeo games were slow to an older hardware one of the arcades.
Testing the games of Neogeo by Retroarch, the games run well.. I am using the following configuration for this system in Atrract Mode:

Code: [Select]
# Generated by Attract-Mode v2.1.0-1-dirty
#
executable           /usr/bin/retorarch <----It was misspelled.
args                -L /usr/lib/i386-linux-gnu/libretro/fb_alpha_neo_libretro.so "[romfilename]"
rompath              $HOME/sistemas/neogeo/roms
romext               .zip;.7z;<DIR>
system               Arcade
info_source          thegamesdb.net
artwork    flyer           
artwork    marquee         $HOME/sistemas/neogeo/marquee
artwork    snap            $HOME/sistemas/neogeo/snap
artwork    wheel           $HOME/sistemas/neogeo/wheel

Unfortunately, the NeoGeo games do not start using the frontend Attract Mode. Can anyone help me solve this problem? What are the correct arguments for Retroarch on Linux?


Pages: [1]