Author Topic: Raspberry Pi Image for Pi2, Pi3 and Pi4 - with RetroPie  (Read 523700 times)

matthewj

  • Jr. Member
  • **
  • Posts: 19
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #465 on: October 16, 2016, 07:11:22 AM »
I changed the attract mode exit key as a temp fix, but other buttons sometime gone through.

bkaz

  • Jr. Member
  • **
  • Posts: 12
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #466 on: October 16, 2016, 08:12:47 AM »
V.02 doesn't seem to have the problem. I made a fresh copy of it, added a few ROMS, and the games exit properly. I only tested a few, but it's working great. Will stick with this one for now.

matthewj

  • Jr. Member
  • **
  • Posts: 19
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #467 on: October 16, 2016, 01:00:59 PM »
Same with me, v2 is working. Is it coincidence that when x was removed that this started happening?

bkaz

  • Jr. Member
  • **
  • Posts: 12
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #468 on: October 16, 2016, 07:08:29 PM »
Probably not a coincidence. Hopefully Floob can use this info to fix the newer versions. Now my v0.2 isn't downloading any preview videos (worked fine on my other builds). It's downloading all the other images correctly when I run the scraper. Not sure why the videos aren't downloading... I did enable video downloading in the scraper settings. Any ideas?

matthewj

  • Jr. Member
  • **
  • Posts: 19
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #469 on: October 17, 2016, 03:53:54 AM »
I don't use the scraper. I have all the artwork from emumovies.

matthewj

  • Jr. Member
  • **
  • Posts: 19
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #470 on: October 17, 2016, 12:32:03 PM »
I know why I wanted to upgrade was that v2 crashes after a period of time. If you leave it running the screensaver starts by showing the snaps from your roms. If i leave it going over night it it at the prompt when i get up.

The error that shows is "xinit: connection to X server lost

I might have to swap out the ipac for a controller if I can't figure this out.

Any ideas?

bkaz

  • Jr. Member
  • **
  • Posts: 12
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #471 on: October 17, 2016, 09:28:17 PM »
I won't be able to work on mine until this weekend, but I was going to try to manually upgrade Attract Mode to the latest version. If that doesn't work, I'll do a fresh install and set it up from scratch without using these images.

Omamez

  • Sr. Member
  • ****
  • Posts: 222
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #472 on: October 21, 2016, 08:03:34 AM »
@ Floobs can we see v0.6 with the to do list and bug fixes :-)

Maouu

  • Full Member
  • ***
  • Posts: 27
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #473 on: October 30, 2016, 04:38:38 AM »
Hello !! It is possible to increase/decrease volume by the buttons ?!!

Thanks for your help

noxx

  • Full Member
  • ***
  • Posts: 28
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #474 on: October 31, 2016, 04:41:26 AM »
Hello

Can  anyone help me with mame?

The Roms dont start.

I download mame 32bit from here
http://forum.attractmode.org/index.php?topic=361.0

and put this file in //raspi3/bios/mame2003

I put my roms in //raspi3/roms/mame4all

Is this right? I found no manual for mame. Other roms works

matthewj

  • Jr. Member
  • **
  • Posts: 19
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #475 on: October 31, 2016, 05:08:02 AM »
Noxx, what version of the roms are you using?

noxx

  • Full Member
  • ***
  • Posts: 28
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #476 on: October 31, 2016, 10:27:02 AM »
Mame0177b

matthewj

  • Jr. Member
  • **
  • Posts: 19
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #477 on: October 31, 2016, 11:12:26 AM »
That's the wrong romset for advancemame. See this page for versions. https://github.com/retropie/retropie-setup/wiki/Managing-ROMs

Maouu

  • Full Member
  • ***
  • Posts: 27
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #478 on: November 03, 2016, 07:44:32 AM »
Hello !! It is possible to increase/decrease volume by the buttons ?!!

Thanks for your help


Nobody to help me ?!!

Thanks.

bkaz

  • Jr. Member
  • **
  • Posts: 12
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #479 on: November 03, 2016, 08:36:07 AM »
I know why I wanted to upgrade was that v2 crashes after a period of time. If you leave it running the screensaver starts by showing the snaps from your roms. If i leave it going over night it it at the prompt when i get up.

The error that shows is "xinit: connection to X server lost

I might have to swap out the ipac for a controller if I can't figure this out.

Any ideas?
So I finally had a little time to get my cabinet up and running. It's using v.2 and I only have a 60 ROMS on it. Mine occasionally ends up at the prompt in the morning. One of my roms has a video preview file that causes Attract Mode to crash. I've seen other threads here referring to certain video files crashing Attract Mode. I haven't gotten around to removing the offending file, but I know which one it is because when I scroll through the games it crashes robospin every single time I stop on that game.

So perhaps the screen saver is hitting a video file that is crashing Attract Mode. It might not be noticeable in later builds that have better/hardware accelerated decoding enabled.