Author Topic: Mame not getting focus  (Read 5148 times)

CB

  • Newbie
  • *
  • Posts: 3
    • View Profile
Mame not getting focus
« on: September 22, 2018, 12:56:00 AM »
Hi, the problem I have (most of the time, sometimes all works great) is that when I launch a game, I get a black screen, but do not see neither mame nor AM. With CTRL+ALT+DEL I can see that mame has loaded and I can change focus to it and the games plays correctly. When I exit mame and return to AM then I get the problem again when launching any game.
I have tried with different themes, with different screen resolutions, with clean installs and with a different graphics card. The card I have connected normally is an Intel onboard card (Dell Optiplex), the other I tried is a Radeon 7470.
I have read several posts (mostly where mame does not release focus to AM), but I can't find a solution.
Any advice greatly appreciated
Many thanks


Luke_Nukem

  • Sr. Member
  • ****
  • Posts: 135
    • View Profile
    • Blogging about Rust lang
Re: Mame not getting focus
« Reply #1 on: September 22, 2018, 01:18:31 AM »
Windows or Linux?

CB

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Mame not getting focus
« Reply #2 on: September 22, 2018, 01:38:09 AM »
Hi, Windows 7
Thanks

CB

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Mame not getting focus
« Reply #3 on: September 24, 2018, 11:45:24 AM »
I have tested with version 2.4.0 and all works good (same emulator, paths, config etc. as version2.4.1). Unfortunately version 2.4.0 causes me a different problem (will start a new post for that). Could someone check if the changes made from 2.4.0 -> 2.4.1 cause the problem?
Thanks

Tapper

  • Jr. Member
  • **
  • Posts: 24
    • View Profile
Re: Mame not getting focus
« Reply #4 on: October 05, 2018, 12:43:19 PM »
AM has big problems with regaining focus in Windows 10 it seems.

I've just spent an hour trying to get 2.30 or 2.41 to work properly with MAME, and it just cannot get focus back when exiting MAME.

Also, trying to run latest MAME 0.202, it just goes to a black screen. My old 0.201 build launches at least. But can't properly exit back to AM because AM can't get focus.

I love AM, but I'm close to settling on another FE at this point.

keilmillerjr

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1167
    • View Profile
Re: Mame not getting focus
« Reply #5 on: October 05, 2018, 01:16:51 PM »
I’m running attract with windows 10 1607 and have no issues. I might upgrade my cab with attract 2.4.1 and mame 0.201 this weekend. Will report back.

toothlessgrinn

  • Sr. Member
  • ****
  • Posts: 190
    • View Profile
Re: Mame not getting focus
« Reply #6 on: October 05, 2018, 05:23:46 PM »
I myself have found many issues with 2.4 and 2.41 so I went back to 2.3. And I use mame 191 . works perfect. So I'm thinking try using 2.3. 32bit cuz 64bit has issues as well. Don't know if its just a windows thing or what...
we came , we saw , we lost LOTS of quarters...

Win 7
Asus mobo amd 64bit 3core
12g ram
4 player. Custom built woody cab
46" plasma screen with 22" marquee

Fenserc

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • HeheParty
Re: Mame not getting focus
« Reply #7 on: October 11, 2018, 06:26:42 AM »
I'd recommend going to 10 if you haven't already or have a good reason not to.