Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Omamez

Pages: [1] 2 3 ... 15
General / fatel error for github sfml and attractmode git clone 12072017
« on: September 12, 2017, 03:17:10 AM »
trying to clone attract mode and sfml from gothub getting fatel error either via putty or experimental retropie 4.20

is the git hub down?

General / Re: Asus takes on Raspberry Pi with 4K-capable Tinker Board
« on: January 25, 2017, 01:51:05 AM »

from the supplier in the uk - WWW.CPC.CO.UK

Total cost including shipping
Goods . . . :              45.83
Discount. . :                   
Charges . . :              18.56 Shipping
Tax . . . . :              12.88
Total . . . :              77.27 GBP
CPC can ship off mainland UK subject to freight and some product restrictions.

so it is little pricey if you ask me i can buy 3 raspberry pi 3 or 2 odroid's c2 and the biggest problem will be the support you can have the best HW but without community support it useless unless you know to program

General / Asus takes on Raspberry Pi with 4K-capable Tinker Board
« on: January 24, 2017, 04:12:57 AM »
32-bit A17 CPU bolstered by fast Mali-T764 GPU, 2GB of RAM, and gigabit Ethernet.

General / Re: pi is hot 83C
« on: January 17, 2017, 06:01:05 PM »
you can also use Thermal Switch in series with the fan when it reaches certain temp it switched on teh fan and once cooled down switches off

also if you can add sega 32x pls

General / Re: pi is hot 83C
« on: January 16, 2017, 07:25:52 PM »
Configure-->General-->Video Decoder = mmal

If you can choose mmal, hardware encoding (ffmpeg) is installed. if not then this will give you issues with snaps

also if you are getting coloured squares maybe under powered by psu many cheap chinese ones are under powered

General / Re: pi is hot 83C
« on: January 11, 2017, 11:14:35 PM »
yes some artic 5 paste does help or even better use extractor fan hole saw hole top case and plenty smaller holes under the case 20 holes and use one of these to extract the hot air.

don't place the pi on top set top boxes or amplifiers

fans rated at 12v but will run at 5v make sure it extracting air not blowing down onto soc

heat sinks work but like progets said 99% of them are gimmicks for rpi from ebay or amazon look at rs components for decent one and the thermal is poor so maybe combination might further help

I don't think you will do damage to the pi as these soc's have throttle architecture and will lower cpu down to 1 core min but you will experience game play issues due to this

Announcements / Re: Version 2.2.1 Released
« on: January 10, 2017, 11:24:00 PM »
ahhhh thank you sir raygun, can I update this without killing my current setup I created yesterday lol

good to see this project coming to life !

Themes / Re: ArcadeBliss Re-Skin
« on: January 06, 2017, 07:41:12 AM »
it does rather look nice clean

General / Re: Raspberry Pi Image for Pi 2 and Pi 3
« on: January 06, 2017, 07:30:32 AM »
you have a valid point

Themes / Re: Ultimate NES Console Theme
« on: January 05, 2017, 02:07:18 PM »
Ken79 - One of magician themer's is creating one

Themes / Re: WIP Layouts with Speaking voice & new random section
« on: January 05, 2017, 02:04:00 PM »
it is cool but can also become annoying if you are scrolling for a little while

General / joystick & buttons template
« on: January 05, 2017, 02:00:58 PM »
I had few templates I made before HDD crash

I don't want to redo it as it took long time to create on photoshop was wondering if there is 6 button upside down smile style template that some likes to share with me

Pages: [1] 2 3 ... 15