Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Floob

Pages: [1] 2 3 ... 6
1
General / Raspberry Pi Image for Pi4 - with RetroPie 4.8
« on: April 15, 2022, 09:11:58 AM »
Following on from the Pi2 and Pi3 image, here is one for the Pi4 in case anyone needs it:
http://www.smartretro.co.uk/forums/viewtopic.php?f=3&t=8277





15th April 2022 - v0.6
- For Raspberry Pi 4B/400
- RetroPie 4.8.2 (https://retropie.org.uk/)
- Attract Mode 2.6.2 (http://attractmode.org/)
- Minor tweaks include, quiet boot, custom menu to choose AM or ES, preloading layouts and Kodi
- Build is for Raspberry Pi 4B
- Binaries updated as of 15th April 2022
- Credits to:
Yaron - http://forum.attractmode.org/index.php?topic=3289.0
Verion - http://forum.attractmode.org/index.php?topic=252.0

2
General / Re: Raspberry Pi Image for Pi 2 and Pi 3
« on: March 26, 2022, 01:21:36 PM »
I was thinking of updating this for the Pi4. If anyone has any requests for features please let me know.

3
General / Re: Raspberry Pi Image for Pi 2 and Pi 3
« on: January 27, 2017, 12:34:42 PM »
hi i installed your v0.5
works fine ,but videos sometimes work then not , keep freezing , still can here sound but no video
also changed the intro video, and that do same

could anyone  please help

thanks

http://forum.attractmode.org/index.php?topic=1249.0

4
General / Re: Rpi 3 Attract Mode v0.5 - Setting up Shaders
« on: January 21, 2017, 02:57:51 PM »
You can set shaders up in the configuration menu:
https://github.com/retropie/retropie-setup/wiki/Configuration-Editor

There should be an option in the menu to flip between AM and Emulation Station, although you can access the retropie setup from AM menu anyway:
https://www.youtube.com/watch?v=-ssbyofbm4Q

5
General / Re: Raspberry Pi Image for Pi 2 and Pi 3
« on: December 23, 2016, 02:04:38 PM »
floobs are you playing Santa this year and releasing new floobs image or has Santa retired ?
Ha! Maybe in the new year, although its now in RetroPie so perhaps not so much need.
https://retropie.org.uk/forum/topic/93/attract-mode-with-retropie-alternative-to-emulationstation/264

7
General / Re: Runcommand box not showing in AM but shows in ES?
« on: November 14, 2016, 03:40:31 PM »
Change
default = "pifba"
to read
default = "lr-mame2003"

You should do that via runcommand really though.

8
General / Re: Runcommand box not showing in AM but shows in ES?
« on: November 13, 2016, 11:30:32 AM »
Does it have the same issue if you use my image?

9
General / Re: Runcommand box not showing in AM but shows in ES?
« on: November 13, 2016, 09:50:54 AM »
Maybe the <DIR> is throwing it, try this


Code: [Select]

# Generated by Attract-Mode v2.0.0
#
executable           /opt/retropie/supplementary/runcommand/runcommand.sh
args                 0 _SYS_ arcade "[romfilename]"
rompath              /home/pi/RetroPie/roms/arcade
romext               .fba;.zip;.FBA;.ZIP
system               Arcade
info_source          thegamesdb.net
import_extras        /home/pi/.attract/mame-config
artwork    flyer           /home/pi/RetroPie/roms/mame-libretro/flyer
artwork    marquee         /home/pi/RetroPie/roms/mame-libretro/marquee
artwork    snap            /home/pi/RetroPie/roms/mame-libretro/snap
artwork    wheel           /home/pi/RetroPie/roms/mame-libretro/wheel


copy and paste to make sure its exactly that rather than edit.

10
General / Re: Runcommand box not showing in AM but shows in ES?
« on: November 13, 2016, 07:21:30 AM »
If you are using all 0.78 with mame2003 you may as well put them in the libretro directory. Its really only when you need to mix and match you would need them in the arcade directory.
I mean the attract mode config for an emulator - basically the one you posted at the top, I just want to see exactly what your config shows, a copy and paste or link to pastebin should do it.


11
General / Re: Runcommand box not showing in AM but shows in ES?
« on: November 12, 2016, 10:10:22 AM »
Please post your .cfg and confirm your roms are in
/home/pi/RetroPie/roms/arcade
Is it a single or mixed romset version in there?

In ES, you are using the "Arcade" emulator?

12
General / Re: Runcommand box not showing in AM but shows in ES?
« on: November 11, 2016, 06:39:14 PM »
Can you post your emulator config you are using? And if you boot direct into ES its fine - just to make sure the runcommand isnt set not to show?

13
General / Re: Runcommand box not showing in AM but shows in ES?
« on: November 11, 2016, 05:05:25 PM »
Try pressing a button regardless of not seeing the box at the point where it would normally appear - so straight after game selection.
Does that bring up the runcommand menu?

14
General / Re: config/emulator game starting help
« on: November 03, 2016, 02:23:05 PM »
@xbouncer That wont use the RetroPie configs, which is fin, but just checking.

I'd use this format if you want to use the RetroPie configs: http://pastebin.com/GcrQGLcP

Does your command line work if you remove this from the arguments? --config /opt/retropie/configs/megadrive/retroarch.cfg

15
General / Re: Attract mode always starts in setup screen
« on: November 01, 2016, 02:22:52 PM »
There should an option to load the last screen you were on, its in the main menu options.

Pages: [1] 2 3 ... 6