Attract-Mode Support Forum
Attract-Mode Support => Themes => Topic started by: omegaman on August 23, 2015, 11:08:41 AM
-
Post the cabinet image...
-
Find 2 excellent vewlix cabinet pictures. ;)
Hi omegaman, I think the pictures can do it further processing. Thanks.
-
(https://scontent-hkg3-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/11892249_10153137888801801_2909587241764706363_n.jpg?oh=0f696b38cb0e7b7122c4c8c9a72ef5e7&oe=5674EFEA)
Quick test :P . Try to updated layout nut file. Since it appears new area that high light with red circle. It can add more game artwork in later. Thanks. ;)
[attachment deleted by admin]
-
@kent79
Great pictures (if you like that kind of a cab), but I'm afraid that your cab doesn't fit this particular theme at all.
The whole idea behind the new cab image I'm preparing was to add some variety to the theme WITHOUT changing position and geometry of artwork (ie screen and marquee must be EXACTLY the same size and position) - this obviously can't be done with your image.
It's maybe more suitable to multi-emu theme that omegaman is working right now http://forum.attractmode.org/index.php?topic=327.0 where each emulator gets its own layout.
-
@kent79
Great pictures (if you like that kind of a cab), but I'm afraid that your cab doesn't fit this particular theme at all.
The whole idea behind the new cab image I'm preparing was to add some variety to the theme WITHOUT changing position and geometry of artwork (ie screen and marquee must be EXACTLY the same size and position) - this obviously can't be done with your image.
It's maybe more suitable to multi-emu theme that omegaman is working right now http://forum.attractmode.org/index.php?topic=327.0 where each emulator gets its own layout.
Yes, but it can update the code to fit image. Wish omegaman create a new topic (project) to do that. Or omegaman do you mind I create a new topic? Since I know some programming, may be I can help to update code to fit vewlix cabinet pictures base on Roboskin spinwheel. Thanks. :)
-
The code is done and this is the first iteration... Cabinet still needs to be cleaned up a bit.
-
Yes, this doesn't have to be robospin, just another fork based on it.
-
The code is done and this is the first iteration... Cabinet still needs to be cleaned up a bit.
We didn't mirror picture to fit Roboskin spinwheel since joystick controller will be incorrect display. So we need to update code to change the wheel location. Please see my post #96 and download new nut file . I will try to clean up the picture and update code again.
It is better you may concentrate all effort to complete original once first. Thanks. ;)
-
The first cabinet was on the left side. That's cool... I do have too many pokers in the fire, anyway.
-
The first cabinet was on the left side. That's cool... I do have to many pokers in the fire, anyway.
Really, that good and waiting for your update then. Thanks.
-
One more advise. For location of Flyers artwork, we can put it next to monitor like as below ;D
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xat1/v/t1.0-9/11220878_10153139126166801_4991480435712687218_n.jpg?oh=ebfb90a42182a51a6ca47891a3f0b9fe&oe=567EDA3C&__gda__=1449711870_d393e3a322b85db1c0e97db972890887)
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/11902253_10153139126351801_583602856458686198_n.jpg?oh=58b5fd0de8b614444d9b11fe1f979e8b&oe=5671BA0A&__gda__=1450931509_f40335b7a415763e1f6645813926bb30)
-
I think it's a time to move it to the separate thread - and call it something like VELVIX spinwheel
-
I think it's a time to move it to the separate thread - and call it something like VELVIX spinwheel
Agree. Wish omegaman open it soon. One more, could you help to improve VELVIX's cabinet graphical? I am less skill on doing that. Thank you very mush :-*
-
I can make a clean cut from the background.
-
I can make a clean cut from the background.
ok, please help to create one. Thanks. ;)
-
I've cut the cab from background and cleaned it from any junk stickers and screenshots.
In attached zip you will find cab image on transparent background (png).
Good luck with the layout.
-
I've cut the cab from background and cleaned it from any junk stickers and screenshots.
In attached zip you will find cab image on transparent background (png).
Good luck with the layout.
Many Thanks and I have taken some time to fix some graph issue on the left top concer.
-
Just update the code. ;)
@ omegaman
Do you know how to change Play count value to rom file name ? Thanks.
[attachment deleted by admin]
-
Kent-
I don't understand your question. The play count gets updated every time you play the game.
-
Kent-
I don't understand your question. The play count gets updated every time you play the game.
My question is , I want to show the rom file name such as 3wonders.zip, captcomm.zip, ssf2.zip instead of play count. Thanks.
-
Ken-
In the layout section go to the played heading or Line 192 of the updated version. Make the following changes.
from this... local play = fe.add_text( "Played: " + "[ PlayedCount]", flx*0.095, fly*0.86, flw*0.3, flh*0.022 );
to this... local play = fe.add_text( "[Name]", flx*0.095, fly*0.86, flw*0.3, flh*0.022 );
-
@omegaman
The cab name is VEWLIX. I've notice it when I was removing the producer logo from the cab - until now I was 100% sure that it is VELVIX :)
Can you change the thread title in first post?
-
(https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpl1/v/t1.0-9/11954588_10153146649126801_8944360827003957591_n.jpg?oh=13ebce2ed6c6bd6a5ced2ce8c7f3e22a&oe=56381948&__gda__=1446398578_85e342286841b36be337ea0ce23e7ede)
Bug Fix and minor update :D
[attachment deleted by admin]
-
Just amend it to another version - verticle . Enjoy :D
(https://scontent-hkg3-1.xx.fbcdn.net/hphotos-xtl1/v/t1.0-9/11221343_10153146649131801_6652241496154467702_n.jpg?oh=e27215798023c87d4e837add32de2c67&oe=566B13D5)
[attachment deleted by admin]