Attract-Mode Support Forum

Attract-Mode Support => General => Topic started by: keilmillerjr on February 15, 2018, 06:05:56 PM

Title: Installing MXE via home-brew on Mac to compile attract
Post by: keilmillerjr on February 15, 2018, 06:05:56 PM

http://mxe.cc/#requirements

Installing MXE via home-brew on Mac to compile attract.

I have home-brew already installed. Ran the following command:

Code: [Select]

brew install \
    autoconf automake coreutils gdk-pixbuf gettext \
    gnu-sed gnu-tar intltool libtool p7zip wget xz

This part of the requirements is what bothers me:

Quote

Some formulae are keg-only and will need brew link to be found.

You can tell there is some issues relating to keg-only based on the output from the command. Too long for this post so I will attach full length to post and in a gist link: https://gist.github.com/keilmillerjr/60a59bcdeaafd7c6ab453d2c8bd6ff6e

I tried running „make“ on the local repo and it confirms the issues:

Code: [Select]

Keils-iMac:mxe keiljr$ make
[create settings.mk]
[check requirements]
Missing requirement: autopoint
Missing requirement: scons

Please have a look at "docs/index.html" to ensure
that your system meets all requirements.

Can anyone help me sort out what I need to do to get the requirements part working so I can compile attract for windows?