Messages

1

General / Controller Setup

« on: July 17, 2024, 02:33:29 AM »

Hello,
i use AM on my PI4 with a "xin-mo dual arcade" controller.
how can i config the controller for both player?
in TAB / CONTROLS i the a list, but dont know what is for
Player1 or Player2?

is there a default config available?

2

General / Boot from SD to USB

« on: April 28, 2017, 10:11:17 PM »

hello

is it possible to add a button in Attract Mode (like the boot to emulator station) to boot
a Attract Mode from a USB Stick?
i want a second installation on a USB Stick (first system on SD Card).

- Power ON: Boot AM on SD
- Push Button in AM "USB": Reboot and Boot USB Stick
- Power OFF
- Power ON: Boot AM on SD
- ...

regard

3

General / Re: add button to config menu?

« on: April 26, 2017, 09:23:54 AM »

ok, i think its not possible

is it perhaps possible, to open a screen with a button?
eg Joy0 Button1 + Joy0 Button2 open Screen XYZ ?

4

General / add button to config menu?

« on: April 25, 2017, 12:08:33 PM »

hello,

is it possible to add some buttons in the config menu, so that
i can start a shell script, eg "start emustation.sh", "poweroff.sh" or "reboot.sh"?

i ve only one screen, and all roms are in this list. so, it would
be nice, if i can reboot from the config menu or others.

5

General / Re: Bind key to suspend

« on: April 23, 2017, 10:09:10 AM »

solved, forget to enable this "plugin" in the settings menu

6

General / Re: Bind key to suspend

« on: April 23, 2017, 07:48:31 AM »

i try this to reboot system, but will not work

i add a file MyCustomCommand.nut to /home/pi/.attract/plugins

Code: [Select]

fe.add_signal_handler( "custom_signal" )
function custom_signal( signal )
{
if ( signal == "custom1" )
{
fe.plugin_command( "@EXECUTABLE", "sudo reboot" );
}
}
or

Code: [Select]

fe.add_signal_handler( "custom_signal" )
function custom_signal( signal )
{
if ( signal == "custom1" )
{
fe.plugin_command( "/home/pi/.attract/Attract Mode Setup/Reboot.sh", "@CL_PARAMETERS" );
}
}

but nothing happens

7

General / Re: Default Screen ?

« on: April 23, 2017, 07:12:46 AM »

thx
but there is only

Show Display Menu
Show Last Sektion (Default)
Launch Last Game

I cant select a special Screen, eg Mame

8

General / Default Screen ?

« on: April 23, 2017, 02:22:31 AM »

hello, is it possible to set a screen as default screen, so that after reboot
this screen is visable as first?

9

General / Re: XIN MO USB Controller - System detect only one Controller/Player

« on: April 23, 2017, 02:21:13 AM »

thx

Did you go through the EmulationStation input configuration for both player1 and player2?

yes

here my n64 cfg

Code: [Select]

mupen64plus-GLideN64 = "/opt/retropie/emulators/mupen64plus/bin/mupen64plus.sh mupen64plus-video-GLideN64 %ROM% 320x240"
default = "mupen64plus-GLideN64"
mupen64plus-gles2rice = "/opt/retropie/emulators/mupen64plus/bin/mupen64plus.sh mupen64plus-video-rice %ROM% 320x240"
mupen64plus-GLideN64-highres = "/opt/retropie/emulators/mupen64plus/bin/mupen64plus.sh mupen64plus-video-GLideN64 %ROM% 640x480"
mupen64plus-gles2rice-highres = "/opt/retropie/emulators/mupen64plus/bin/mupen64plus.sh mupen64plus-video-rice %ROM% 640x480"
mupen64plus-gles2n64 = "/opt/retropie/emulators/mupen64plus/bin/mupen64plus.sh mupen64plus-video-n64 %ROM%"
mupen64plus-videocore = "/opt/retropie/emulators/mupen64plus/bin/mupen64plus.sh mupen64plus-video-videocore %ROM%"
lr-mupen64plus = "/opt/retropie/emulators/retroarch/bin/retroarch -L /opt/retropie/libretrocores/lr-mupen64plus/mupen64plus_libretro.so --config /opt/retropie/configs/n64/retroarch.cfg %ROM%"


10

General / Re: XIN MO USB Controller - System detect only one Controller/Player

« on: April 22, 2017, 11:45:25 PM »

you are right, im blind.
 

works now, system detect now 2 controllers.
works with the most emus. but problems with n64.
the controller #1/#2 works nor correct. all other works fine

11

General / XIN MO USB Controller - System detect only one Controller/Player

« on: April 22, 2017, 09:49:06 AM »

Hello

i use the    
Raspberry Pi Image for Pi 2 and Pi 3

on my station i have a USB Controlle for 2 Players, XIN MO
http://www.xin-mo.com/dual-players-controller.html

i try to edit the controller in Retroarch and also in Emu-Station, but
both detect only one Controller:  XIN MO ... (#1)

what can i do?

12

Themes / wheel pngs ?

« on: November 05, 2016, 05:19:06 AM »

hello,

can anyone told me, where can i find wheel pngs?

13

General / Re: Raspberry Pi Image for Pi 2 and Pi 3

« on: November 05, 2016, 02:34:10 AM »

it works now. but not with listxml, i try it with listsoftware, and
now the scrabber use the mame.xml

Code: [Select]

# Generated by Attract-Mode v2.1.0
#
executable           /opt/retropie/supplementary/runcommand/runcommand.sh
args                 0 _SYS_ mame-libretro "[romfilename]"
rompath              /home/pi/RetroPie/roms/mame-libretro
romext               .zip
system               Arcade
info_source          listsoftware
import_extras        /home/pi/.attract/mame-config/mame.xml
artwork    marquee         /home/pi/RetroPie/roms/mame-libretro/marquee
artwork    snap            /home/pi/RetroPie/roms/mame-libretro/snap
artwork    wheel           /home/pi/RetroPie/roms/mame-libretro/whee


14

General / Re: Raspberry Pi Image for Pi 2 and Pi 3

« on: November 05, 2016, 02:24:56 AM »

a question about the mame versions.

i have a rom, digdug. this will only run if i use mame-advmame
with the other both, the game dont start.

the problem with the mame-advmame is, that i cant use my controller.
has anyone a idea?

15

General / Re: Rename Games ?

« on: November 05, 2016, 12:30:12 AM »

i unzip this mame.zip and put the mame.xml to
/home/pi/.attract/mame-config

after this i delete the screen and the MAME (Libretro).txt in
/home/pi/.attract/romlists
then i reboot the pi

after this, i generate a new romlist with the GUI.

and i see dkong3 in my "new" list, not Donkey Kong 3

MAME (Libretro).cfg in
/home/pi/.attract/emulators

Code: [Select]

# Generated by Attract-Mode v2.1.0
#
executable           /opt/retropie/supplementary/runcommand/runcommand.sh
args                 0 _SYS_ mame-libretro "[romfilename]"
rompath              /home/pi/RetroPie/roms/mame-libretro
romext               .zip
system               Arcade
info_source          listxml
import_extras        /home/pi/.attract/mame-config/mame.xml;/home/pi/.attract/mame-config/catver.ini;/home/pi/.attract/mame-config/nplayers.ini
artwork    flyer           /home/pi/RetroPie/roms/mame-libretro/flyer
artwork    marquee         /home/pi/RetroPie/roms/mame-libretro/marquee
artwork    snap            /home/pi/RetroPie/roms/mame-libretro/snap
artwork    wheel           /home/pi/RetroPie/roms/mame-libretro/wheel