Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Sebiohazard

Pages: [1] 2 3
1
Emulators / Re: VirtuaNes o Nestopia settings ???
« on: April 18, 2020, 06:25:08 AM »
Hello glad everything works :)

Which core libretro do you use for MAME ?

Greetings !

2
Emulators / Re: VirtuaNes o Nestopia settings ???
« on: April 16, 2020, 03:37:55 AM »
Hello !

With the Nestopia core of RetroArch it only takes one argument to launch your games & directly in fullscreen :) here is the argument:

Code: [Select]
executable           c:\attract\emulators\retroarch\retroarch.exe
args                 -L c:\attract\emulators\retroarch\cores\nestopia_libretro.dll "[romfilename]"
rompath              c:\attract\games\nes
romext               .nes

Obviously you have to adapt the path of your executable of your cores as well as your games with your configuration :) this is a simple example so that you understand how it works.

Greetings !

3
Emulators / Re: VirtuaNes o Nestopia settings ???
« on: April 14, 2020, 11:00:38 AM »
Hello !

You can use RetroArch with the Nestopia core without problem :)

4
Hello thank you for your answer regarding the NeoCD Libretro core :)

Regarding MAME I find this very complicated emulator... that's why I prefer RetroArch... moreover I emulate the Amiga 1200 & the Amiga CD32 & MAME does not really allow it. With RetroArch Amiga machines work very well !

By cons I found an alternative solution to launch NeoGeo cartridge & NeoGeo CD games with the FBNeo Libretro core of RetroAch here is the procedure:

For NeoGeo cartridge games:

Code: [Select]
executable           cmd
args                 /c "[romfilename]"
rompath              c:\attract\games\neogeo
romext               .bat

Then you have to create a .bat file for each game (example for the game Magician Lord) & place it in the games folder where the game .zip file is located:

Code: [Select]
c:
cd c:\attract\emulators\retroarch\
retroarch.exe -L c:\attract\emulators\retroarch\cores\fbneo_libretro.dll "c:\attract\games\neogeo\maglord.zip"

For NeoGeo CD games:

Code: [Select]
executable           cmd
args                 /c "[romfilename]"
rompath              c:\attract\games\neogeo cd
romext               .bat

Then you have to create a .bat file for each game (example for the Pulstart game) & place it in the games folder where the game's .cue & .bin files are located:

Code: [Select]
c:
cd c:\attract\emulators\retroarch\
retroarch.exe -L c:\attract\emulators\retroarch\cores\fbneo_libretro.dll --subsystem neocd "c:\attract\games\neogeo cd\pulstar.cue"

This is the only way I found... on the other hand it is restrictive because we have to create a different .bat file for each game !!! I hope this will be of service to others...

Greetings !

5
I don't understand... anyone to help me ?!

6
Quote
RetroArch is not an emulator, nor is it a frontend. It’s mission statement on their website is confusing. It bundles multiple emulators into „cores“  and shares some libraries as well as configurations.

I know it well but for Nintendo SEGA or SONY consoles it was never a problem... & especially what I don't understand why RetroArch works very well in command line but not with Attract Mode ???

Quote
Open any game through neocd and go to options and turn Skip cd loading to on then restart the game. Thats is for point 1.

Hello I did not understand what you mean ? Can you explain me with screenshots ?

Greetings !

7
Hello !

Simply because I want to use a single emulator for all Attract Mode & because it has a lot of interesting options :)

8
Hello & thank you for your help!

I have three problems:

1. The core neocd_libretro works well with Attract Mode but I no longer have this screen before loading a game:



I think this is due to some missing BIOS files (see documentation here) because I cannot find the following files:

neocd_f.rom
neocd_sf.rom
neocd_t.rom
neocd_st.rom
neocd_z.rom
neocd_sz.rom


2. The core neocd_libretro does not support NeoGeo cartridge games...

3. I have the same problem when launching MAME games with the core mame_libretro.

Greetings !

9
Good morning all !

I have a big problem with the fbneo libretro core for NeoGeo & NeoGeo CD games with RetroArch. Under Attract Mode for NeoGeo games I use this:

Code: [Select]
executable           c:\attract\emulators\retroarch\retroarch.exe
args                 -L c:\attract\emulators\retroarch\cores\fbneo_libretro.dll "[romfilename]"
rompath              c:\attract\games\neogeo
romext               .zip

Unfortunately nothing happens... on the other hand, from the command line (Windows console) NeoGeo games launch without problem like this:

Code: [Select]
c:
cd c:\attract\emulators\retroarch\
retroarch.exe -L c:\attract\emulators\retroarch\cores\fbneo_libretro.dll "c:\attract\games\neogeo\roboarmy.zip"

Same for NeoGeo CD games under Attract Mode if I use these arguments nothing happens:

Code: [Select]
executable           c:\attract\emulators\retroarch\retroarch.exe
args                 -L c:\attract\emulators\retroarch\cores\fbneo_libretro.dll --subsystem neocd "[romfilename]"
rompath              c:\attract\games\neogeo cd
romext               .cue

By cons command line with CMD (Windows console) if I use the same arguments it works why ???

Code: [Select]
c:
cd c:\attract\emulators\retroarch\
retroarch.exe -L c:\attract\emulators\retroarch\cores\fbneo_libretro.dll --subsystem neocd "c:\attract\games\neogeo cd\pulstar.cue"

I have the same problem for mame libretro... how to proceed please ?

Greetings !

10
Hello I have no problem with other cores RetroArch only with that for MAME I do not understand ?!

Try to test & tell me thank you !

Greetings 8)

11
Emulators / Argument for emulator MAME Libretro - Very strange thing ?!
« on: October 27, 2019, 04:40:35 AM »
Good morning all 8)

There is one thing very strange with the emulator MAME Libretro... With the following argument the games do not run:

Code: [Select]
executable           e:\emulateurs\retroarch\retroarch.exe
args                 -L e:\emulateurs\retroarch\cores\mame_libretro.dll "[romfilename]"
rompath              e:\jeux\mame
romext               .zip

By cons if I run the games with the same argument but this time on the command line it works ?!?!

Code: [Select]
retroarch -L e:\emulateurs\retroarch\cores\mame_libretro.dll e:\jeux\mame\inthunt.zip
I do not understand looking for the mistake ?!

Greetings !

12
Emulators / Re: Argument for MESS emulator (Color Computer + GX4000) ?
« on: October 16, 2019, 12:47:59 PM »
Hello !

For the GX4000 I found this so I added the following argument

Code: [Select]
executable           e:\emulateurs\mess\messui 0.213\messui64.exe
args                 gx4000 -cart "[romfilename]"
rompath              e:\jeux\gx4000
romext               .bin

Unfortunately MESS launches but not the games why ?

Thanks best regards !

13
Emulators / Argument for MESS emulator (Color Computer + GX4000) ?
« on: October 15, 2019, 08:14:27 AM »
Good morning all !

I would like the arguments for the emulator MESS to launch the Color Computer & the GX4000 ?

MESS is already very complicated I hope it is possible to launch games from Attract Mode ?

Is there a database for Attract Mode that groups all the arguments of all emulators ?

Thanks best regards !

14
Emulators / Window problem with FS-UAE Launcher
« on: October 10, 2019, 08:12:00 AM »
Good morning all !

I have a problem with FS-UAE Launcher when I run a game...

The window of the Launcher does not appear I must click on the left button of my mouse to enter the Launcher ?!

I activated the ResFix option but nothing changes...

How to proceed thank you greetings !

15
General / Re: How to create a display list of machines ?
« on: October 08, 2019, 03:19:35 AM »
Quote
or using filter

Hello OK but how are the filters used ? There is a tutorial ?

Thanks best regards !

Pages: [1] 2 3