Author Topic: Raspberry Pi Image for Pi 2 and Pi 3  (Read 266911 times)

Ricardo

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #375 on: June 26, 2016, 11:27:45 AM »

good afternoon gentlemen, it accepts a SD 64 gb? I use a RPI3 . thank you guys

progets

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1015
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #376 on: June 26, 2016, 04:15:46 PM »
Yes, you can use a 64GB SD card.

verion

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 840
    • View Profile
    • new projects
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #377 on: June 27, 2016, 02:23:19 AM »
@Floob

I've just bought RPi3 and I'm planning to try your image, but I would like to wait for next version (without emulation station) if you are planning to release it within a few weeks. Please let me know.

Floob

  • Full Member
  • ***
  • Posts: 82
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #378 on: June 27, 2016, 11:57:12 AM »
@verion At a guess, if there is demand I'll do it in about a month.
RetroPie Help Guides: https://goo.gl/3gcNsT

verion

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 840
    • View Profile
    • new projects
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #379 on: June 27, 2016, 12:52:11 PM »
Great!  So I'll wait.
I have to whip up a nice RPi arcade box for my 2-weeks vacation in august (in case of bad weather).

Mayki07

  • Full Member
  • ***
  • Posts: 31
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #380 on: June 27, 2016, 02:24:36 PM »
It would be great to have Retropie 4.0 with Attract 2.1...  ;)

Misterhollyw00d

  • Full Member
  • ***
  • Posts: 28
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #381 on: June 29, 2016, 06:05:31 AM »
Can you add Turbografx16/PC Engine and Sega CD to the list of emulators thank you

progets

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1015
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #382 on: June 29, 2016, 02:33:30 PM »
Can you add Turbografx16/PC Engine and Sega CD to the list of emulators thank you

You can easily do this yourself. Just create the a new emulator with the following information...

TurboGrafx-16/PC Engine
Code: [Select]
# Generated by Attract-Mode v2.0.0
#
executable           /opt/retropie/supplementary/runcommand/runcommand.sh
args                 0 _SYS_ pcengine "[romfilename]"
rompath              /home/pi/RetroPie/roms/pcengine
romext               .pce
system               TurboGrafx 16
info_source          thegamesdb.net
artwork    flyer           /home/pi/RetroPie/roms/pcengine/flyer
artwork    marquee         /home/pi/RetroPie/roms/pcengine/marquee
artwork    snap            /home/pi/RetroPie/roms/pcengine/snap
artwork    wheel           /home/pi/RetroPie/roms/pcengine/wheel

Sega CD (I don't think these are going to run well on the Pi)
Code: [Select]
# Generated by Attract-Mode v2.0.0
#
executable           /opt/retropie/supplementary/runcommand/runcommand.sh
args                 0 _SYS_ segacd "[romfilename]"
rompath              /home/pi/RetroPie/roms/segacd
romext               .bin
system               Sega CD
info_source          thegamesdb.net
artwork    flyer           /home/pi/RetroPie/roms/segacd/flyer
artwork    marquee         /home/pi/RetroPie/roms/segacd/marquee
artwork    snap            /home/pi/RetroPie/roms/segacd/snap
artwork    wheel           /home/pi/RetroPie/roms/segacd/wheel

Omamez

  • Sr. Member
  • ****
  • Posts: 222
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #383 on: June 29, 2016, 03:25:02 PM »
@verion At a guess, if there is demand I'll do it in about a month.

+1  8) 8) 8) 8) 8) ;D

Floob

  • Full Member
  • ***
  • Posts: 82
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #384 on: June 29, 2016, 04:08:43 PM »

Sega CD (I don't think these are going to run well on the Pi)


Here are some examples.
https://youtu.be/PkktRuK8uWU
RetroPie Help Guides: https://goo.gl/3gcNsT

progets

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1015
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #385 on: June 29, 2016, 09:38:20 PM »

Sega CD (I don't think these are going to run well on the Pi)


Here are some examples.
https://youtu.be/PkktRuK8uWU

I stand corrected. I had a RetroPie build with many "experimental" systems on it a while ago and know that 3D0, Dreamcast and Jaguar didn't run that great. I thought Sega CD was in that mix too. I know Dreamcast has gotten much better since then and maybe some others have too. I also think it was on a Pi2 because the Pi3 wasn't out yet.

Omamez

  • Sr. Member
  • ****
  • Posts: 222
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #386 on: June 30, 2016, 01:03:10 AM »

Misterhollyw00d

  • Full Member
  • ***
  • Posts: 28
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #387 on: July 27, 2016, 01:17:06 PM »
Has anyone set up attract mode for a cocktail cabinet?
For cocktail the tv screen is vertical
I know in options u can change display and rotate so menu appears vertical

Is there a way to get this working on mame?
Do you have to use a particular mame? Is any tv/monitor going to work or you have to get a certain kind? I go to options on mame the flip option works fine but stays the same. Even when switched to cocktail it doesn't rotate

DietCoke

  • Full Member
  • ***
  • Posts: 25
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #388 on: July 27, 2016, 03:43:52 PM »
To use a usb drive we need to edit a file in emulationstation and change the paths for attract emulator configs.

So, here's what we do. Edit the /etc/emulationstation/es_systems file and change the system paths that you want to use a usb drive. Example, for the mame system, change this line.

 <path>/media/usb0/roms/mame</path>
   
Now, when you boot into emulationstation to configure your emulators it should scan the new rom path on the usb drive.


When I boot in and try to edit I'm getting denied due to rights.  What's the syntax for editing that es_systems.cfg file?

progets

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1015
    • View Profile
Re: Raspberry Pi Image for Pi 2 and Pi 3
« Reply #389 on: July 27, 2016, 05:59:40 PM »
use this command
Code: [Select]
sudo nano /etc/emulationstation/es_systems.cfg