Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - nitrogen_widget

Pages: 1 ... 17 18 [19] 20 21
271
General / Re: raspberry pi 2
« on: March 05, 2015, 08:50:26 PM »
Here is what I see when I launch AM with GLSHIM
Quote
pi@raspberrypi ~/Downloads/attract-1.5.1 $ LD_LIBRARY_PATH=/lib LIBGL_FB=1 attract
Starting Attract-Mode 1.5.1 (Linux)
Config: /home/pi/.attract/attract.cfg

*** Initializing display: 'daphne'
 - Loaded master romlist 'mame' in 7 ms (185 entries kept, 0 discarded)
 - Constructed 2 filters in 5 ms (370 comparisons)
AL lib: (WW) alc_initconfig: Failed to initialize backend "pulse"
libGL: built on Mar  6 2015 01:56:54
libGL: framebuffer output enabled
libGL backend: libGLESv1_CM.so
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
libGL: unknown attrib 100000
libGL: unknown attrib 100001
glXSwapInterval(0)
Enable LIBGL_VSYNC=1 if you want to use vsync.
glXSwapInterval(1)
Enable LIBGL_VSYNC=1 if you want to use vsync.
glXGetProcAddress: glCopyTexSubImage3D not found.
glXGetProcAddress: glDrawRangeElements not found.
glXGetProcAddress: glTexSubImage3D not found.
glXGetProcAddress: glCompressedTexImage1D not found.
glXGetProcAddress: glCompressedTexImage3D not found.
glXGetProcAddress: glCompressedTexSubImage1D not found.
glXGetProcAddress: glCompressedTexSubImage3D not found.
glXGetProcAddress: glGetCompressedTexImage not found.
glXGetProcAddress: glLoadTransposeMatrixd not found.
glXGetProcAddress: glLoadTransposeMatrixf not found.
glXGetProcAddress: glMultTransposeMatrixd not found.
glXGetProcAddress: glMultTransposeMatrixf not found.
glXGetProcAddress: glBlendColor not found.
glXGetProcAddress: glBlendEquation not found.
glXGetProcAddress: glFogCoordPointer not found.
glXGetProcAddress: glMultiDrawArrays not found.
glXGetProcAddress: glMultiDrawElements not found.
glXGetProcAddress: glPointParameteri not found.
glXGetProcAddress: glPointParameteriv not found.
glXGetProcAddress: glSecondaryColorPointer not found.
glXGetProcAddress: glWindowPos2d not found.
glXGetProcAddress: glWindowPos2dv not found.
glXGetProcAddress: glWindowPos2f not found.
glXGetProcAddress: glWindowPos2fv not found.
glXGetProcAddress: glWindowPos2i not found.
glXGetProcAddress: glWindowPos2iv not found.
glXGetProcAddress: glWindowPos2s not found.
glXGetProcAddress: glWindowPos2sv not found.
glXGetProcAddress: glWindowPos3d not found.
glXGetProcAddress: glWindowPos3dv not found.
glXGetProcAddress: glWindowPos3f not found.
glXGetProcAddress: glWindowPos3fv not found.
glXGetProcAddress: glWindowPos3i not found.
glXGetProcAddress: glWindowPos3iv not found.
glXGetProcAddress: glWindowPos3s not found.
glXGetProcAddress: glWindowPos3sv not found.
glXGetProcAddress: glMultiTexCoord1dARB not found.
glXGetProcAddress: glMultiTexCoord1dvARB not found.
glXGetProcAddress: glMultiTexCoord1fARB not found.
glXGetProcAddress: glMultiTexCoord1fvARB not found.
glXGetProcAddress: glMultiTexCoord1iARB not found.
glXGetProcAddress: glMultiTexCoord1ivARB not found.
glXGetProcAddress: glMultiTexCoord1sARB not found.
glXGetProcAddress: glMultiTexCoord1svARB not found.
glXGetProcAddress: glMultiTexCoord2dARB not found.
glXGetProcAddress: glMultiTexCoord2dvARB not found.
glXGetProcAddress: glMultiTexCoord2iARB not found.
glXGetProcAddress: glMultiTexCoord2ivARB not found.
glXGetProcAddress: glMultiTexCoord2sARB not found.
glXGetProcAddress: glMultiTexCoord2svARB not found.
glXGetProcAddress: glMultiTexCoord3dARB not found.
glXGetProcAddress: glMultiTexCoord3dvARB not found.
glXGetProcAddress: glMultiTexCoord3fARB not found.
glXGetProcAddress: glMultiTexCoord3fvARB not found.
glXGetProcAddress: glMultiTexCoord3iARB not found.
glXGetProcAddress: glMultiTexCoord3ivARB not found.
glXGetProcAddress: glMultiTexCoord3sARB not found.
glXGetProcAddress: glMultiTexCoord3svARB not found.
glXGetProcAddress: glMultiTexCoord4dARB not found.
glXGetProcAddress: glMultiTexCoord4dvARB not found.
glXGetProcAddress: glMultiTexCoord4iARB not found.
glXGetProcAddress: glMultiTexCoord4ivARB not found.
glXGetProcAddress: glMultiTexCoord4sARB not found.
glXGetProcAddress: glMultiTexCoord4svARB not found.
glXGetProcAddress: glSecondaryColorPointerEXT not found.
glXGetProcAddress: glXCreateNewContext not found.
glXGetProcAddress: glXCreatePbuffer not found.
glXGetProcAddress: glXCreatePixmap not found.
glXGetProcAddress: glXDestroyPbuffer not found.
glXGetProcAddress: glXDestroyPixmap not found.
glXGetProcAddress: glXGetCurrentReadDrawable not found.
glXGetProcAddress: glXGetSelectedEvent not found.
glXGetProcAddress: glXMakeContextCurrent not found.
glXGetProcAddress: glXQueryContext not found.
glXGetProcAddress: glXQueryDrawable not found.
glXGetProcAddress: glXSelectEvent not found.
 - Loaded layout: /usr/local/share/attract/layouts/basic/ (layout.nut)
ERROR: EGL Error detected: EGL_BAD_CONTEXT (0x3006)
Failed to destroy EGL context.
Failed to destroy EGL context.

This is what AM looks like after launch.

272
General / Re: raspberry pi 2
« on: March 05, 2015, 08:25:58 PM »
ok,
latest GLSHIM and attract-mode actually works.
sort of.
AM without glshim looks good but is dog slow to the point of un-usable.
AM with glshim flies.
but, at launch there are all kinds of errors about missing openGL calls and the fonts are all messed up to the point where it looks like gibberish and blank spaces.

so, I decided to compile SFML 2.2 with opengl es.
That actually compiled.
but when I try to compile attract mode with it I get these errors which I think is because opengl doesn't exist on the rpi?

Quote
//lib/libsfml-graphics.so: undefined reference to `glFramebufferTexture2DOES'
//lib/libsfml-graphics.so: undefined reference to `glGenRenderbuffersOES'
//lib/libsfml-graphics.so: undefined reference to `glCheckFramebufferStatusOES'
//lib/libsfml-graphics.so: undefined reference to `glBlendEquationSeparateOES'
//lib/libsfml-graphics.so: undefined reference to `glBindFramebufferOES'
//lib/libsfml-graphics.so: undefined reference to `glRenderbufferStorageOES'
//lib/libsfml-graphics.so: undefined reference to `glDeleteRenderbuffersOES'
//lib/libsfml-graphics.so: undefined reference to `glFramebufferRenderbufferOES'
//lib/libsfml-graphics.so: undefined reference to `glBindRenderbufferOES'
//lib/libsfml-graphics.so: undefined reference to `glDeleteFramebuffersOES'
//lib/libsfml-graphics.so: undefined reference to `glGenFramebuffersOES'
//lib/libsfml-graphics.so: undefined reference to `glBlendFuncSeparateOES'
collect2: error: ld returned 1 exit status
Makefile:259: recipe for target 'attract' failed
make: *** [attract] Error 1

so, back to square one.
After I put SFML2.1 back on my rpi i'll post the errors I get with GLSHIM.

273
General / Re: raspberry pi 2
« on: March 05, 2015, 05:13:19 PM »
So, updating my rpi2 to jessie raspbian.
for the last day & a half.  :o

I really don't want to attempt compiling sfml on raspbian so it's worth the wait. :)
I found a simple compile guide for glshim.

if that works i'll go for attract.

274
General / Re: 1.5 on linux emulator cfg issues
« on: February 28, 2015, 02:44:54 PM »
config loads and saves correctly now.

Thanks

275
General / Re: 1.5 on linux emulator cfg issues
« on: February 28, 2015, 08:28:09 AM »
ok,
I was tired last night i looked again and the mame.cfg file is correct in the user profile but the new attract isn't loading it.

I put attract 1.4 back on & it read the mame.cfg file in the user profile just fine.

I put 1.5 back on & copied the mame.cfg to /usr/local/share/attract/emulators and now it reads it.

I don't think it's a rights issue.
and if I delete the .attract folder from the profile attract recreates it but still ignores the mame.cfg in the folder.

any ideas?

276
General / 1.5 on linux emulator cfg issues
« on: February 27, 2015, 08:24:45 PM »
Hi,
Newest version overwrites my .cfg file for mame with the default every time it's started.
I've duplicated this on two different linux systems.
Removing the default .cfg file from the /usr/local/share/attract stops the overwrite but then attract won't let me open the config for the mame emulator.

any ideas?

277
Announcements / Re: Version 1.5
« on: February 27, 2015, 07:00:16 PM »
just an FYI, I could not compile this with SFML 2.2.
2.1 & 2.0 however still compile fine.
They must of changed something because the compiler was throwing up errors about unrecognized calls to the window library.
(if that means anything to anyone) :P


278
Announcements / Re: Version 1.5
« on: February 26, 2015, 09:31:49 PM »
thumbs up to mala layouts.
Even if it is beta.

279
Themes / Re: Modern themes with retro feel
« on: February 22, 2015, 06:36:33 PM »
Thanks man!
I'll try it out this week.

280
General / Re: raspberry pi 2
« on: February 22, 2015, 06:33:40 PM »

My research has discovered attractmode is running well on the open pandora board.
I thought the version in jessie arm was 2.2.
I'll have time to look at it this week after I get raspbian installed.

281
Themes / Re: Modern themes with retro feel
« on: February 22, 2015, 04:11:37 PM »
I downloaded most of the wheel art in a 95gb hyperspin torrent years ago and then filled in the missing ones using this webpage:
http://hyperbase.hyperspin-fe.com/artwork.asp?t=wheelhave&s=2&c=6&p=yes

Otherwise, you can become a supporting member of hyperspin and get access to their FTP where you can download all the wheel art.

can you make your layout available for download?

282
Themes / Re: Modern themes with retro feel
« on: February 22, 2015, 06:10:38 AM »
Hey drunkatu,

That Mame theme looks real nice.
Where did you get the wheel art for it?
It really pops without the boarders.

283
General / Re: Linux packages
« on: February 21, 2015, 04:00:11 PM »
I'll give it a shot on my virtual PC.

yeah. blank screen also at boot.  :D

I can check on the PClinuxos forums to see if I broke something with virtualbox.

284
General / Re: raspberry pi 2
« on: February 21, 2015, 12:19:11 PM »
mine finally came in.
I loaded up a bare debian jessie image & attempted to compile attract mode but i'm pretty sure i need to do something with the compiler/make file to get it to work because it errors out.

Code: [Select]
root@jessie-rpi:/home/mame/attract-1.4.1# make
g++ -o attract obj/fe_base.o obj/fe_util.o obj/fe_util_sq.o obj/fe_info.o obj/fe_input.o obj/fe_xml.o obj/fe_settings.o obj/fe_build.o obj/fe_config.o obj/fe_presentable.o obj/fe_present.o obj/sprite.o obj/fe_image.o obj/fe_sound.o obj/fe_shader.o obj/fe_overlay.o obj/fe_window.o obj/tp.o obj/fe_text.o obj/fe_listbox.o obj/fe_vm.o obj/main.o obj/media.o obj/libexpat.a obj/libsquirrel.a obj/libsqstdlib.a obj/libaudio.a  -DDATA_PATH=\"/usr/local/share/attract/\" -O2 -Iextlibs/audio/include -I/usr/include/AL  -Iextlibs/expat -Iextlibs/squirrel/include -Iextlibs/sqrat/include  -DUSE_AVRESAMPLE -lsfml-graphics -lsfml-window -lsfml-network -lsfml-system -lavformat -lavcodec -lavutil -lswscale -lopenal -lavresample
/usr/bin/ld: /usr/lib/gcc/arm-linux-gnueabihf/4.9/libgcc_s.so.1: invalid string offset 27827 >= 20347 for section `.dynstr'
/usr/lib/gcc/arm-linux-gnueabihf/4.9/libgcc_s.so.1: error adding symbols: File format not recognized
collect2: error: ld returned 1 exit status
Makefile:255: recipe for target 'attract' failed
make: *** [attract] Error 1

I get an error trying to run the configure script for advmame .106 also.
It tell me compiler can't make executables.

Think i'll go the raspbian route & try to add the jessie respository next.

285
Scripting / Re: monitor rotation on linux
« on: February 21, 2015, 12:03:37 PM »
Thanks for pointing me in the right direction.

Pages: 1 ... 17 18 [19] 20 21