Related Stuff > Emulators

How ad this emulator PC6001VX????

(1/3) > >>

gamesmame:
https://github.com/eighttails/PC6001VX

Emulator:  https://github.com/eighttails/PC6001VX/releases/download/v3.8.2/PC6001VX_3.8.2_win_64bit.zip  v3.8.2

I think this is wrong:


--- Code: ---# Generated by Attract-Mode v2.6.2
#
executable           M:\Emulators\NEC PC-6001/PC6001VX.exe
args                 "[romfilename]" "[Rating]"
rompath              M:\Emulators\NEC PC-6001\roms
romext               .p6;.cas
system               NEC PC-6001
info_source          thegamesdb.net
exit_hotkey          Escape
--- End code ---

Emulators open but dont read rom!!!

Mark Norville:
Your link mostly is in Chinese ok it is Japanese after going back so not a good start on that score lol

It will translate just to add, I had a very quick scan but could not find any cli arguments, but as I say it was a very quick scan. As it is a cassette system or seems to be, but try finding a c64 argument and use that as a reference. Anything with tape based systems may help for reference.

I would try [name] or other alternatives remove the "[]"

Also you have "[Rating]"

This is a system that I have not tried, or even know about but your args are worrying

I just had a look at my setup I usually have name, I do have "[Romfilename]" but usually when it is retro arch apart from that it is [name]

p6t,p6,cas

MOUNT TAPE IMAGE (FOR LOAD ONLY)

d88

MOUNT DISK IMAGE TO DRIVE 1

rom,bin

MOUNT EXTENDED ROM IMAGE

dds

READ SAVE FILES ANYWHERE

ddr

read replay data files

bas,txt

read the batting agency file

Regards

Mark

gamesmame:
i try  [name] and nothing change... the emulator open but dont load "rom"..

OFFAM... for the emulator work, we need open the emulator, after clic in "ENTER"

Clic with right the mouse / tape / insert and select game...



after: tape "cload" and clic "ENTER" again, after: tape "run" and clic "ENTER" then the emulator load game :-P  :-\

I dont know how i transform this in arg for Attract Mode...

Emulator name: PC6001VX.exe 
Emulator:  https://github.com/eighttails/PC6001VX/releases/download/v3.8.2/PC6001VX_3.8.2_win_64bit.zip  v3.8.2

gamesmame:
I found this:

https://github.com/eighttails/PC6001VX/blob/master/compatible_rom/basic66-v031/src/basicrom.lst

Its helps??

Mark Norville:
As I said before

As it is tape based it might help to look at cassette or floppy disc based systems

args                 --floppy-drive-0="[romfilename]" --fullscreen --floppy-drive-0-sounds=0 --floppy-drive-speed=100 --floppy-drive-volume-empty=100  --base-dir="C:\attract\EMU\amiga\Configuration"

These are the args for Amiga 500 you do have others, but it shows you the kind of arguments that you need to get games to load.

Go through this little lot http://forum.attractmode.org/index.php?topic=503.0

Regards

Mark

Navigation

[0] Message Index

[#] Next page