Arcadeflow theme v 15.7 [Release] Updated 03 February 2023

[zpaolo11x]

Thanks. I did rename it to Arcadeflow_90 and changed the cfg to match. Still getting the index error.

Then I need some more info, can you run

Code: [Select]

attract-console.exe > log.txt
you'll find a "log.txt" file in attract mode folder, can you share it with me? Also, the prefs_layoutoptions.txt from Arcadeflow folder will be helpful.
I tried to replicate the issue using a cfg like yours but I can't...

Oh I just noticed another thing: your layout is set to start as "display_menu", do you use a display menu lauout? You should set the AM startup to its default value, if you want to start with the display menu page in Arcadeflow you can set it in its own options

[Jontox]

It plays videos from the current romlist/filter in random order. It's zoomed because each game shows only a certain number of scanlines from the middle of the screen. Sometimes this can be an issue if your videosnaps have an higher resolution than what was the original game resolution (e.g. mame snaps in full HD resolution, for console games it should be correct). Can you share a screenshot of the zoomed-in view, and some details about your video file? BTW a bit of zooming is "by design".

I do confirm this is what it's occurring, I've got Mame video snaps in full HD resolution.
Unfortunately, a screenshot is not obvious to take during attract mode screensaver, but it is exactly as you described.

Is there any work around this issue ?
Or it is how the attract mode screensaver was coded ?

[zpaolo11x]

I do confirm this is what it's occurring, I've got Mame video snaps in full HD resolution.
Unfortunately, a screenshot is not obvious to take during attract mode screensaver, but it is exactly as you described.

Is there any work around this issue ?
Or it is how the attract mode screensaver was coded ?

For console games I coed the real game resolution in the layout, so even if the video is HD the filter is applied at the original console resolution. For MAME it's a bit more difficult, because each game has a different resolution, and this data is not in the romlist, so I usually get that from the game snap.
At the moment there's no solution, but just in case, do you have static snaps too? Are those in the original game resolution? Because I'm thinking of a workaround I can code for the new revision...

[Jontox]

For console games I coed the real game resolution in the layout, so even if the video is HD the filter is applied at the original console resolution. For MAME it's a bit more difficult, because each game has a different resolution, and this data is not in the romlist, so I usually get that from the game snap.
At the moment there's no solution, but just in case, do you have static snaps too? Are those in the original game resolution? Because I'm thinking of a workaround I can code for the new revision...

All my video snaps are coming from emumovies FTP source.
These are HQ ones for Mame and the resolution is 640*480 (Horizontal) or 480*640 (Vertical).

The Gameplay snaps or screenshots (still from emumovies FTP source) are on the contrary in the game original resolution.

I.e.: 3countb rom does have:
- a gameplay snap of 320*224
- a video snap of 640*280

[zpaolo11x]

All my video snaps are coming from emumovies FTP source.
These are HQ ones for Mame and the resolution is 640*480 (Horizontal) or 480*640 (Vertical).

The Gameplay snaps or screenshots (still from emumovies FTP source) are on the contrary in the game original resolution.

I.e.: 3countb rom does have:
- a gameplay snap of 320*224
- a video snap of 640*280

Cool, I got my mame videos from here: http://www.progettosnaps.net/videosnaps/ and they are at the correct pixel resolution with correct display aspect ratio, but since you have pixel perfect snaps I can fix the layout to make it work with your videos

[bionictoothpick]

Thanks. I did rename it to Arcadeflow_90 and changed the cfg to match. Still getting the index error.

Then I need some more info, can you run

Code: [Select]

attract-console.exe > log.txt
you'll find a "log.txt" file in attract mode folder, can you share it with me? Also, the prefs_layoutoptions.txt from Arcadeflow folder will be helpful.
I tried to replicate the issue using a cfg like yours but I can't...

Oh I just noticed another thing: your layout is set to start as "display_menu", do you use a display menu lauout? You should set the AM startup to its default value, if you want to start with the display menu page in Arcadeflow you can set it in its own options

[bionictoothpick]

Thanks for spending the extra time troubleshooting.

[Jontox]

Cool, I got my mame videos from here: http://www.progettosnaps.net/videosnaps/ and they are at the correct pixel resolution with correct display aspect ratio, but since you have pixel perfect snaps I can fix the layout to make it work with your videos

That sounds like music to my ears, thanks a lot !

[zpaolo11x]

Thanks for spending the extra time troubleshooting.

I've put together a patched layout.nut, you can try putting this into your Arcadeflow folder and see if it fixes the problem with your configuration.

[bionictoothpick]

Hello, I tried the new layout.nut.

Still locks up attractmode, displays other system images for a moment...

No difference that I could detect.

[bionictoothpick]

I think it has something to do with visual pinball being obscure compared to the others.

[zpaolo11x]

I think it has something to do with visual pinball being obscure compared to the others.

I noticed a couple of things in your attract.cfg that we can try to change:

   startup_mode         displays_menu
   menu_layout          af

It seems you are starting Attract Mode in "Show displays menu" mode, and using AF as a menu layout. This will not work, AF is no more good as a Display Menu layout. You should change the startup mode to the default value (last selected I thing) and as menu layout set "Default" which means no menu layout is used.
I'd try this first to see if it fixes, then you can enable display menu at boot in AF options.

[bionictoothpick]

Thanks, I did change those, but still have the same error.

I think it has something to do with visual pinball being obscure compared to the others.

I noticed a couple of things in your attract.cfg that we can try to change:

   startup_mode         displays_menu
   menu_layout          af

It seems you are starting Attract Mode in "Show displays menu" mode, and using AF as a menu layout. This will not work, AF is no more good as a Display Menu layout. You should change the startup mode to the default value (last selected I thing) and as menu layout set "Default" which means no menu layout is used.
I'd try this first to see if it fixes, then you can enable display menu at boot in AF options.

[zpaolo11x]

Thanks. I did rename it to Arcadeflow_90 and changed the cfg to match. Still getting the index error.

I tried replicating the error with your prefs file and configuration file, but it still seems to work. Are you using the stock 2.6.1 or a nightly build? Also, at this point I think I'll need an archive with your emulators and romlists folders (the ones inside attract mode folder), so I can actually have a sort of mirror of your system :O

[zpaolo11x]

It appears that AF failed to create the new directory for AF9 as Arcadeflow_89 is still intact in the layout folder and Arcadeflow_90 is not.

Believe it or not, I think I finally sorted it out and now, from my tests, auto-update works! If you want to try it, I  crafted a "dummy" layout.nut with 8.9 version (but it is in fact a 9.1 beta LOL) so you can check if it happily updates to 9.0...

Of course, if the update works, 9.0 won't be able to update to 9.1 because it still has the old layout.nut