Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - hermine.potter

Pages: [1] 2 3 ... 25
1
General / Re: Starting Fusion 364 over Attract Mode
« on: Today at 01:01:15 AM »
@KamikazeSAT
this is my config to start genesis romfiles via fusion:
Code: [Select]
executable           C:\attract\EMU\Fusion364\Fusion.exe
args                 "[romfilename]" -gen -auto -fullscreen
rompath              C:\attract\EMU\Fusion364\roms
romext               .bin;.gen

Fusion supports another systems/consoles like 32x

or you just leave system:
Code: [Select]
executable           C:\attract\EMU\Fusion364\Fusion.exe
args                 "[romfilename]" -auto -fullscreen
rompath              C:\attract\EMU\Fusion364\roms
romext               .bin;.gen

2
Emulators / Re: Autoit Error
« on: Yesterday at 11:24:06 PM »
@qqplayer
I'm not using Retroarch. So I can't help 100%.

After starting retroarch.exe and aut3info.exe of autoit:
retroarch starts a window without any visible text (so cell of visible text of au3info is empty).


so you need to add a delay (sleep command).
the F11 key disable the mouse cursor, right?

so this should do it:
Code: [Select]
WinWait("RetroArch","")
WinWaitActive("RetroArch","")
sleep(1000)
send("{F11}")

3
Emulators / Re: Autoit Error
« on: May 17, 2018, 10:55:29 PM »
you mix/mistake autoit with autohotkey.
they're two different languages, with different syntax

sleep command autoit
sleep command autohotkey

4
General / Re: Open File With ROM
« on: May 03, 2018, 03:56:04 AM »
@theamity9
it's similar to the settings of OpenBor

Code: [Select]
executable           cmd
args                 /c cd C:\attract\EMU\OpenBOR\[name] & start OpenBOR.exe & start C:\attract\EMU\OpenBOR\wait_for_ESC.exe
rompath              C:\attract\EMU\OpenBOR
romext               <DIR>

using cmd, /c, & and start

5
General / Re: fbalpha CPS3 roms wont load in Attract Mode Windows 7
« on: May 01, 2018, 10:39:47 PM »
@tonberryhunter
put AM aside.
open CMD / command line and enter your path, exe and so on.
If you are able to start your romfiles from there, tell us the complete command.
then we can transfer it to AM.

6
General / Re: Phoenix Project
« on: May 01, 2018, 10:32:19 PM »

7
General / Re: fbalpha CPS3 roms wont load in Attract Mode Windows 7
« on: April 27, 2018, 05:04:03 AM »
Please post your command line entry.
For example starting CPS2, you need this command (depending to your paths):
Code: [Select]
"C:\attract\EMU\RetroArch\retroarch.exe" -L "C:\attract\EMU\RetroArch\cores\fbalpha2012_libretro.dll" "C:\attract\EMU\RetroArch\roms\19xx.zip"

8
General / Re: Phoenix Project
« on: April 27, 2018, 04:17:38 AM »
@all
is "alt, right, enter, enter" to push this menu button?


maybe autoit suits to you.

I've downloaded Phoenix from here and english language file from there.

Title says this:


create .au3 with this sourcecode and compile it to .exe
Code: [Select]
ShellExecute(@ScriptDir & "\PhoenixEmuProject.exe")

WinWaitActive("Проект эмуляции - «Феникс» в.2.8.JAG", "QWidgetClassWindow")
WinWait("Проект эмуляции - «Феникс» в.2.8.JAG", "QWidgetClassWindow")

send("{LALT}")
send("{RIGHT}")
send("{ENTER}")
send("{ENTER}")

It starts PhoenixEmuProject.exe, waits that menu appear. sends Alt, Right, Enter, Enter for Power-Button

9
General / Re: Phoenix Project
« on: April 26, 2018, 06:28:27 AM »
what are the arguments to start a romfile from commandline?

10
General / Re: future pinball
« on: April 10, 2018, 03:42:54 AM »
@KTURNER
tested both & works:




Did you change your .exe to your existing version? (VPinballXXX.exe)

11
General / Re: future pinball
« on: April 09, 2018, 07:28:54 AM »
@KTURNER
Visual Pinball

12
@sternrulez
try this config (.fpt instead .zip)

13
@Joker
there are external applications like ultramon and multimon. It's possible to control application positioning

14
General / Re: AutoHotkey with AttractMode
« on: March 12, 2018, 01:21:13 AM »
you could use autoit instead.

-start demul.exe > config > plugins and paths > have a look at the value for Video Plugin (in my case : gpuDX11old )

-start a game and have a look at the values of SPG and GPU (in my case the first values, after starting a game, are spg: 2 gpu: 0 )


-create a sourcecode file like START.au3, change the Video Plugin, the value of spg, gpu (in my case gpuDX11old, 2, 0) and then compile it to START.exe:
Code: [Select]
#include <Misc.au3>

ShellExecute(@ScriptDir & "\demul.exe", ' -run=dc -image="' & $CmdLine[1] & '"')
WinWaitActive("gpuDX11oldsw | spg: 2 gpu: 0 |", "")
WinWait("gpuDX11oldsw | spg: 2 gpu: 0 |", "")
Send("!{ENTER}")

while 1
   if _IsPressed ("1B") Then
  ProcessClose("demul.exe")
   EndIf
WEnd

-copy the compiled START.exe to same folder, containing the demul.exe

-create a display/emulator system for demul, depending to your paths (in my case):
Code: [Select]
executable           C:\attract\EMU\demul\START.exe
args                 "[romfilename]"
rompath              C:\attract\EMU\demul\roms
romext               .iso;.cdi

the script starts demul.exe with your romfile (delivered from Attractmode).
it waits for demul.exe, that there is an active window with the settings/title "gpuDX11oldsw | spg: 2 gpu: 0 |".
is this special window active, then the script sends ALT+ENTER to this window.
then it waits, that you push Escape/ESC Button. If ESC is pressed, demul.exe exists and you are back to AM.

15
General / Re: Launching ps1 cue files
« on: March 11, 2018, 11:20:57 PM »

Pages: [1] 2 3 ... 25