Home
Help
Search
Login
Register
Attract-Mode Support Forum
»
Attract-Mode Support
»
General
»
AM System Configuration Utility
« previous
next »
Print
Pages: [
1
]
Author
Topic: AM System Configuration Utility (Read 3560 times)
brat boy
Newbie
Posts: 3
AM System Configuration Utility
«
on:
March 16, 2020, 01:08:35 PM »
Hi All
Please can you assist. I am running a Raspberry PI 3b+ with a 128gb Sandisk SD Card. I loaded the Wolfanoz Arcade only 32gb image. Whenever I boot up I get the below error.
"run AM System COnfiguration Utility to reset the attract.cfg file with a proper identifier"
I do get into attract mode and all works fine. However I would like to get rid of this error.
Is there somthing I need to change or look at to remedy this.
«
Last Edit: March 16, 2020, 01:11:47 PM by brat boy
»
Logged
keilmillerjr
Global Moderator
Hero Member
Posts: 1167
Re: AM System Configuration Utility
«
Reply #1 on:
March 16, 2020, 09:13:52 PM »
No idea what all these images are.
Try removing attract.cfg. To learn linux command line, if need be, see my wiki as a starting point.
Logged
http://arcademvs.org
https://gitlab.com/attractmode/attract
https://gitlab.com/attractmode/wiki
https://attractmode.gitlab.io/wiki/
brat boy
Newbie
Posts: 3
Re: AM System Configuration Utility
«
Reply #2 on:
March 17, 2020, 10:44:08 AM »
Thanks will give it a try
Logged
Print
Pages: [
1
]
« previous
next »
Attract-Mode Support Forum
»
Attract-Mode Support
»
General
»
AM System Configuration Utility