raspberry pi missing layout elements?

[sickle]

I installed attract mode on my RPI 2, but the theme I was testing is missing a few images throughout the layout. I tested on another windows version just to make sure and everything was fine, any idea how to fix this?

raspberry:



PC:


ps, the theme is my turbografx-16 mini theme: http://forum.attractmode.org/index.php?topic=3397.0

[progets]

Linux (Pi) is case sensitive and Windows (PC) isn't. Check all your files and make sure that you have the correct case used for folders, paths, modules, etc.

[sickle]

Linux (Pi) is case sensitive and Windows (PC) isn't. Check all your files and make sure that you have the correct case used for folders, paths, modules, etc.

just tried to fix, I copy/pasted the filenames to be sure and it was still missing all the same files

[progets]

What's your Pi memory split set to? This being too low has been known to cause issues.

Are you running the same resolution on both the Pi and the PC?

You could also do try using the entire layout zipped. I have seen this fix some layouts on the Pi that work fine on a PC. It would be a quick test.

[sickle]

What's your Pi memory split set to? This being too low has been known to cause issues.

Are you running the same resolution on both the Pi and the PC?

You could also do try using the entire layout zipped. I have seen this fix some layouts on the Pi that work fine on a PC. It would be a quick test.

my memory split is at 256mb (max for the pi2)
i locked the output resolution at 1080p (same as PC it was written in)
and i tried zipping it, and nothing changed its outcome

[keilmillerjr]

Any error in console log?